Agilent Technologies / Agilent-DB

Agilent-DB

DB is a brand name for GC columns manufactured by Agilent Technologies™. The columns cover a very wide range of polarity and application and are very inert. All DB phases are bonded and cross-linked and solvent rinsable.

Product Line

Products

Page
Page 8
Page 9
You're currently reading page 10
Page 11
Page 12
Page

Show

DB-1ht,15m,0,25mm,0,10µm, Säule Toroid

AG-222-1111LTM

€1,698.00

Product Type: GC Column Base Material: Dimethylpolysiloxane Delivery Time: approx. 5-6 days Chemistry: 1 (1HT, 1MS) Manufacturer: Agilent Technologies Film Thickness [µm]: 0.1 µm Internal Diameter: 0.25 mm Length: 15 m

DB-1 30m,0,25mm, 0,24µm,5975T ColToroid

AG-222-1032LTM

€2,032.00

DB-1701 30m,0,25mm,0,24µm,5975T ColTor.

AG-222-0732LTM

€2,063.00

Product Type: GC Column Base Material: 14% Cyanopropylphenyl 86% methylpolysiloxane Delivery Time: approx. 5-6 days Chemistry: 1701 (1701HT, 1701MS) Manufacturer: Agilent Technologies Film Thickness [µm]: 0.24 µm Internal Diameter: 0.25 mm Length: 30 m

DB-1ms,30m,0,25mm,0,24µm, Säule Toroid

AG-222-0132LTM

€2,098.00

DB-1ms,15m,0,25mm,0,24µm, Säule Toroid

AG-222-0112LTM

€1,703.00

DB-5msUI,20m,0,18mm,0,18um, Säule Toroid

AG-221-5522UILTM

€2,028.00

Product Type: GC Column Base Material: Phenylarylene dimethylpolysiloxane Delivery Time: approx. 5-6 days Chemistry: 5 (5HT, 5MS) Manufacturer: Agilent Technologies Film Thickness [µm]: 0.18 µm Internal Diameter: 0.18 mm Length: 20 m

DB-5ms,20m,0,18mm,0,18um, Säule Toroid

AG-221-5522LTM

€1,932.00

DB-17ms,20m,0,18mm,0,18um, Säule Toroid

AG-221-4722LTM

€1,932.00

Product Type: GC Column Base Material: Phenylarylene dimethylpolysiloxane Delivery Time: approx. 5-6 days Chemistry: 17 (17HT, 17MS) Manufacturer: Agilent Technologies Film Thickness [µm]: 0.18 µm Internal Diameter: 0.18 mm Length: 20 m

DB-VRX 20m,0,18mm,1,0um,5975T ColToroid

AG-221-1524LTM

€1,948.00

Product Type: GC Column Delivery Time: approx. 5-6 days Chemistry: Volatiles, VRX Manufacturer: Agilent Technologies Film Thickness [µm]: 1 µm Internal Diameter: 0.18 mm Length: 20 m

DB-624,20m,0,18mm,1,00um, Säule Toroid

AG-221-1324LTM

€1,948.00

Product Type: GC Column Delivery Time: approx. 5-6 days Chemistry: 624 (624MS), Volatiles Manufacturer: Agilent Technologies Film Thickness [µm]: 1 µm Internal Diameter: 0.18 mm Length: 20 m USP Class: G43

Page
Page 8
Page 9
You're currently reading page 10
Page 11
Page 12
Page

Show

Technical Data

DB-1:

Excellent general purpose column
Low bleed
Wide range of applications

DB-1ms:

Excellent general purpose column
Identical selectivity to DB-1
Very low bleed characteristics, ideal for GC/MS
Improved acid performance compared to standard 100% dimethylpolysiloxane columns

DB-5:

Excellent general purpose column
Low bleed
Wide range of applications

DB-5ms:

Non-polar phase with excellent inertness for active compounds
Very low bleed characteristics, ideal for GC/MS

DB-XLB:

Low polarity phase with exceptionally low bleed and unique selectivity
Excellent inertness for active compounds
Ideal for confirmational analyses and GC/MS
Excellent for pesticides, herbicides, PCBs and PAHs

DB-35:

Low bleed
Inert to active solutes
Ideal for confirmational analyses

DB-35ms:

Very low bleed characteristics, ideal for GC/MS
Excellent inertness for active compounds
Ideal for confirmational analyses

DB-17:

Mid polarity
Excellent for confirmational analyses

DB-17ms:

Very low bleed mid-polarity column, ideal for GC/MS
Excellent inertness for active compounds
Excellent choice for CLP pesticides

DB-225:

Excellent for separations of cis- and trans-fatty acid methyl esters (FAMEs)

DB-225ms:

Excellent for separations of cis- and trans-fatty acid methyl esters (FAMEs)
Low bleed

DB-23:

High polarity phase for separation of fatty acid methyl esters (FAMEs)
Excellent resolution for cis- and trans-isomers

DB-200:

Ideal for difficult-to-separate positional isomers
Unique interactions with compounds containing nitro, halogen and carbonyl groups
Low ECD bleed

DB-210:

High polarity phase
Excellent for US EPA Methods 8140 and 609

DB-1301:

Low/mid polarity
Exact replacement of HP-1301 and HP-1701

DB-1701:

Low/mid polarity
Exact replacement of HP-1301 and HP-1701

DB-WAX:

Lower temperature limit of 20 °C, improves resolution of low boiling point analytes, compared to other PEG-phases
Column-to-column reproducibility

DB-WaxFF:

Highly reproducible, specially tested microbore DB-Wax for fragrance analysis

DB-WAXetr:

PEG-phase for extended temperature range (etr)
Excellent column-to-column repeatability

DB-FFAP:

Nitroterephthalic acid modified polyethylene glycol phase designed for the analysis of volatile fatty acids and phenols

DB-1ht:

Specially processed for extended temperature limit of 400 °C
High temperature, polyimide-coated, fused silica tubing
Excellent peak shape and faster elution times for high boilers

DB-5ht:

Specially processed for extended temperature limit of 400 °C
High temperature, polyimide-coated, fused silica tubing
Excellent peak shape and faster elution times for high boilers

DB-17ht:

Extended upper temperature limit of 365 °C
High temperature, polyimide-coated, fused silica tubing
Excellent peak shape and faster elution times for high boilers
Improved resolution for triglycerides
Ideal for confirmational analyses

DB-Petro:

Configured for the analysis of petroleum process products
Suitable for PONA/PIANO analyses

DB-2887:

Specifically designed for simulated distillation using ASTM Method D2887
Rapid conditioning, fast run time and low bleed when compared to packed columns

DB-HT SimDis:

"Boiling point" phase for high temperature simulated distillation
Durable stainless steel tubing
Distillation range of C₆ to C₁₁₀₊
Low bleed, even at 430 °C

DB-CLP 1 and DB-CLP 2:

Universal column pair designed for pesticides analyses
EPA Methods: CLP (Contract Lab Program) pesticides, 504.1, 505, 508.1, 551, 552.3, 8081B, 8082A, 8154A
Ideal for dual column, dual ECD GC analyses
Mid polarity stabilized phases provide fast and low bleed reliable analyses
Special testing includes pesticides for proof of performance and column to column reproducibility
DB-CLP1: Primary column; DB-CLP2: Confirmation column

DB-1701P:

Specifically designed and processed for the analysis of organochlorine pesticides
ECD tested to ensure minimal pesticide breakdown and low ECD bleed

DB-608:

Specifically designed for the analysis of chlorinated pesticides and PCBs
US EPA Methods: 608, 508, 8080
Excellent inertness and recoveries without pesticide breakdown

DB-EUPAH:

Specially designed for analysis of EU regulated PAHs
Individually tested with application-specific QC test probe mixture
Great resolution of critical isomers, e.g. benzo(b,j,k)fluoranthenes
Superb thermal stability for accurate analysis of high boiling PAHs, e.g. dibenzopyrenes

DB-UI 8270D:

Designed for EPA Method 8270D and other regulated GC/MS semivolatiles analysis
Special semivolatiles testing ensures poof of column to column performance for trace level analysis
Excellent 2,4-dinitrophenol response
Ultra inertness and low bleed

DB-5.625:

Specially processed to exhibit excellent inertness for EPA Semivolatiles Methods 625, 1625, 8270 and CLP protocols
Surpasses EPA performance criteria for semivolatiles
Inert for base, neutral and acidic compounds
High temperature limit with excellent thermal stability and low bleed

DB-Dioxin:

Specifically engineered for the analysis of polychlorinated dibenzodioxins (PCDDs) and dibenzofurans (PCDFs)
Resolves 2,3,7,8-TCDD and 2,3,7,8-TCDF from all other isomers in one run

DB-624 Ultra Inert:

Environmental volatile organic compounds (VOCs) methods
Excellent for US EPA Methods: 501.3, 502.2, 503.1, 524.2, 601, 602, 8010, 8015, 8020, 8240, 8260
Industrial chemical analyses – solvents, petrochemicals, specialty chemicals
Food and beverage – alcohols, fusel oils
Pharmaceutical residual solvents per USP <467>
Ultra inertness processing expands application range with excellent peak shape for low molecular weight acidic compounds
UI testing ensures premium performance column to column
Identical selectivity to the industry standard DB-624 – upgrade with no change in method required

DB-624:

Specifically designed for the analysis of volatile priority pollutants and residual solvents
No cryogenics needed for US EPA Method 502.2
Excellent for US EPA Methods: 501.3, 502.2, 503.1, 524.2, 601, 602, 8010, 8015, 8020, 8240, 8260, and USP 467
Excellent inertness for active compounds

DB-VRX:

Unique selectivity engineered for optimum resolution of volatiles analysis: US EPA Methods 502.2, 524.2 and 8260
No subambient cooling required to resolve the six "gases"

DB-502.2:

Available in 105 m for volatiles analyses
Excellent peak shape

DB-MTBE:

Low polarity stationary phase
Resolves MTBE from 2-methylpentane and 3-methylpentane for better quantitation
Engineered for purge and trap injection without the need for cryofocusing

DB-TPH:

Specifically designed for the analysis of total petroleum hydrocarbons (TPHs), soil analysis, and LUFT
Three analyses in one injection – gas range organics, diesel range organics and motor oil

DB-ALC1 and DB-ALC2:

Reliable blood alcohol analysis
Optimized primary and confirmation column pair for US blood alcohol analysis
Faster GC run times
Improved resolution of key ethanol/acetone peaks

DB-5ms EVDX:

Specially configured and tested for drugs of abuse confirmation
Drug test mix included: caffeine, glutethimide, lidocaine, phenobarbital, EDDP, methaqualone, methadone, cocaine, desipramine, carbamazepine
Consistent retention and peak shape
Low bleed for GC/MS analysis

DB-Select 624 UI for <467>:

Engineered to optimize pharmaceutical residual solvents analysis per USP Method <467>
Ultra inertness and low bleed
Resolution of USP regulated critical pairs, also separates benzene and 1,2-dichloroethane
UI testing ensures premium performance column to column

Column-Name	Phase	Polarity	USP	ID	Film thickness	T_max^[1]
DB-1	Dimethyl polysiloxane (100%)	Non-Polar	G1, G2, G9, G38	0.05 mm	0.05, 0.20 µm	260‒360 °C
				0.10 mm	0.10, 0.12, 0.20, 0.40 µm
				0.15 mm	1.20 µm
				0.18 mm	0.18, 0.20, 0.40 µm
				0.20 mm	0.33, 0.80 µm
				0.25 mm	0.10, 0.25, 0.50, 1.0 µm
				0.32 mm	0.10, 0.12, 0.25, 0.50, 0.52, 1.0, 1.05, 1.2, 1.5, 2.0, 3.0, 5.0 µm
				0.45 mm	1.27, 2.55 µm
				0.53 mm	0.10, 0.15, 0.25, 0.50, 0.88, 1.0, 1.5, 2.65, 3.0, 5.0 µm
DB-1ms	Dimethyl polysiloxane (100%)	Non-Polar	G1, G2, G9, G38	0.10 mm	0.10, 0.40 µm	340‒360 °C
				0.18 mm	0.18 µm
				0.20 mm	0.33 µm
				0.25 mm	0.10, 0.25 µm
				0.32 mm	0.10, 0.25 µm
DB-5	Diphenyl-/dimethylpolysiloxane (5%/95%)	Non-Polar	G27	0.10 mm	0.10, 0.17, 0.33, 0.40 µm	260‒350 °C
				0.15 mm	1.20 µm
				0.18 mm	0.18, 0.40 µm
				0.20 mm	0.20, 0.33 µm
				0.25 mm	0.10, 0.25, 0.50, 1.0 µm
				0.32 mm	0.10, 0.17, 0.25, 0.50, 0.52, 1.0, 1.05, 1.5 µm
				0.45 mm	0.42, 1.27 µm
				0.53 mm	0.25, 0.50, 0.88, 1.0, 1.5, 2.65, 3.0, 5.0 µm
DB-5ms	Phenyl-Arylene-Polymer (equivalent to Diphenyl- /dimethylpolysiloxane (5%/95%))	Non-Polar	G27	0.18 mm	0.18, 0.36 µm	300‒350 °C
				0.20 mm	0.33 µm
				0.25 mm	0.10, 0.25, 0.40, 0.50, 1.0 µm
				0.32 mm	0.10, 0.25, 0.50, 0.52, 1.0 µm
				0.53 mm	0.50, 1.0, 1.5 µm
DB-XLB	N/A	Low-Polar	N/A	0.18 mm	0.18 µm	320‒360 °C
				0.20 mm	0.33 µm
				0.25 mm	0.10, 0.25, 0.50, 1.0 µm
				0.32 mm	0.25, 0.50 µm
				0.53 mm	1.5 µm
DB-35	Diphenyl- /dimethylpolysiloxane (35%/65%)	Mid-Polar	G42	0.25 mm	0.25 µm	280‒320 °C
				0.32 mm	0.25, 0.5 µm
				0.53 mm	0.50, 1.0 µm
DB-35ms	Diphenyl- /dimethylpolysiloxane (35%/65%)	Mid-Polar	G42	0.18 mm	0.18 µm	320‒360 °C
				0.20 mm	0.33 µm
				0.25 mm	0.15, 0.25 µm
				0.32 mm	0.25 µm
				0.53 mm	0.50, 1.0 µm
DB-17	Diphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G3	0.05 mm	0.10 µm	260‒300 °C
				0.10 mm	0.10, 0.20 µm
				0.18 mm	0.18, 0.30 µm
				0.25 mm	0.15, 0.25, 0.50 µm
				0.32 mm	0.15, 0.25, 0.50 µm
				0.53 mm	0.25, 0.50, 1.0, 1.5, 2.0 µm
DB-17ms	Diphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G3	0.18 mm	0.18 µm	320‒340 °C
				0.25 mm	0.15, 0.25 µm
				0.32 mm	0.25 µm
DB-225	Cyanopropylphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G7	0.10 mm	0.10 µm	200‒240 °C
				0.18 mm	0.20 µm
				0.25 mm	0.15, 0.25 µm
				0.32 mm	0.25 µm
				0.53 mm	0.50, 1.0 µm
DB-225ms	Cyanopropylphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G7	0.25 mm	0.25 µm	240 °C
				0.32 mm	0.25 µm
DB-23	(50%-Cyanopropyl)- methylpolysiloxane	Polar	G5	0.18 mm	0.20 µm	230‒260 °C
				0.25 mm	0.15, 0.25 µm
				0.32 mm	0.25 µm
				0.53 mm	0.50 µm
DB-200	(35%-Trifluoropropyl)- methylpolysiloxane	Mid-Polar	G6	0.25 mm	0.25, 0.50 µm	280‒320 °C
				0.32 mm	0.25, 0.50 µm
				0.53 mm	1.00 µm
DB-210	(50%-Trifluoropropyl)- methylpolysiloxane	Polar	G6	0.25 mm	0.25, 0.50 µm	220‒260 °C
				0.32 mm	0.25, 0.50 µm
				0.53 mm	1.0 µm
DB-1301	Cyanopropyl-phenyl- /dimethylpolysiloxane (6%/94%)	Mid-Polar	G43	0.18 mm	0.40 µm	260‒300 °C
				0.25 mm	0.25, 1.0 µm
				0.32 mm	0.25, 1.0 µm
				0.53 mm	1.0, 1.5 µm
DB-1701	Cyanopropyl-phenyl- /dimethylpolysiloxane (14%/86%)	Mid-Polar	G46	0.10 mm	0.10, 0.40 µm	260‒300 °C
				0.18 mm	0.18, 0.40 µm
				0.25 mm	0.15, 0.25, 0.50, 1.0 µm
				0.32 mm	0.15, 0.25, 1.0 µm
				0.53 mm	0.25, 0.50, 1.0, 1.5 µm
DB-WAX	Polyethylene Glycol	Polar	G14, G15, G16, G20, G39, G47	0.05 mm	0.05, 0.10 µm	230‒260 °C
				0.10 mm	0.10, 0.20 µm
				0.18 mm	0.18, 0.30 µm
				0.20 mm	0.20 µm
				0.25 mm	0.15, 0.25, 0.50 µm
				0.32 mm	0.15, 0.25, 0.50 µm
				0.45 mm	0.85 µm
				0.53 mm	0.25, 0.50, 1.0 µm
DB-WaxFF	Polyethylene Glycol	Polar	G16	0.10 mm	0.20 µm	240‒250 °C
DB-WAXetr	Polyethylene Glycol	Polar	G14, G15, G16, G20, G39, G47	0.20 mm	0.40 µm	230‒280 °C
				0.25 mm	0.25, 0.50 µm
				0.32 mm	0.25, 0.50, 1.0 µm
				0.53 mm	1.0, 1.5, 2.0 µm
DB-FFAP	Polyethylene Glycol (modified with Nitroterephthalic acid)	Polar	G25, G35	0.10 mm	0.10 µm	250 °C
				0.25 mm	0.25, 0.50 µm
				0.32 mm	0.25, 0.50, 1.0 µm
				0.45 mm	0.85 µm
				0.53 mm	0.25, 0.50, 1.0, 1.5 µm
DB-1ht	Dimethylpolysiloxane (100%)	Unpolar	G1, G2, G9, G38	0.25 mm	0.10 µm	400 °C
				0.32 mm	0.10 µm
				0.53 mm	0.17 µm
DB-5ht	Diphenyl- /dimethylpolysiloxane (5%/95%)	Unpolar	G27	0.25 mm	0.10 µm	400 °C
				0.32 mm	0.10 µm
DB-17ht	Diphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G3	0.25 mm	0.15 µm	340‒365 °C
				0.32 mm	0.15 µm
DB-Petro	Dimethylpolysiloxane (100%)	Unpolar	N/A	0.20 mm	0.50 µm	325‒350 °C
				0.25 mm	0.50 µm
DB-2887	Dimethylpolysiloxane (100%)	Unpolar	N/A	0.53 mm	3.0 µm	350 °C
DB-HT SimDis	Dimethylpolysiloxane (100%)	Unpolar	N/A	0.53 mm	0.10, 0.15 µm	400‒430 °C
DB-CLP 1 and DB-CLP 2	N/A	N/A	N/A	0.32 mm	0.25, 0.50 µm	340‒360 °C
DB-1701P	Cyanopropyl-phenyl- /dimethylpolysiloxane (14%/86%)	Low/Mid-Polar	G46	0.25 mm	0.25 µm	260‒300 °C
				0.32 mm	0.25 µm
				0.53 mm	1.0 µm
DB-608	N/A	N/A	N/A	0.18 mm	0.18 µm	260‒300 °C
				0.25 mm	0.25 µm
				0.32 mm	0.50 µm
				0.45 mm	0.70 µm
				0.53 mm	0.50, 0.83 µm
DB-EUPAH	Diphenyl-/dimethylpolysiloxane (50%/50%) modified with an aromatic selector	N/A	G51	0.18 mm	0.14 µm	320‒340 °C
				0.25 mm	0.25 µm
				0.32 mm	0.25 µm
DB-UI 8270D	N/A	N/A	N/A	0.18 mm	0.36 µm	325‒350 °C
				0.25 mm	0.25, 0.50 µm
DB-5.625	N/A	N/A	N/A	0.18 mm	0.18, 0.36 µm	325‒350 °C
				0.25 mm	0.25, 0.50, 1.0 µm
				0.32 mm	0.25, 0.50 µm
DB-Dioxin	N/A	Polar	G48	0.25 mm	0.50 µm	325‒350 °C
DB-624 Ultra Inert	Cyanopropyl-phenyl- /dimethylpolysiloxane (6%/94%)	Mid-Polar	G43	0.18 mm	1.0 µm	260 °C
				0.25 mm	1.4 µm
				0.32 mm	1.8 µm
				0.53 mm	3.0 µm
DB-624	Cyanopropyl-phenyl- /dimethylpolysiloxane (6%/94%)	Mid-Polar	G43	0.18 mm	1.0 µm	260‒280 °C
				0.20 mm	1.12 µm
				0.25 mm	1.4 µm
				0.32 mm	1.8 µm
				0.45 mm	2.55 µm
				0.53 mm	3.0 µm
DB-VRX	N/A	N/A	N/A	0.18 mm	1.0 µm	260 °C
				0.25 mm	1.4 µm
				0.32 mm	1.8 µm
				0.45 mm	2.55 µm
DB-502.2	N/A	N/A	N/A	0.25 mm	1.4 µm	260‒280 °C
				0.32 mm	1.8 µm
				0.45 mm	2.55 µm
				0.53 mm	3.0 µm
DB-MTBE	N/A	Low-Polar	N/A	0.45 mm	2.55 µm	260‒280 °C
				0.53 mm	3.0 µm
DB-TPH	N/A	N/A	N/A	0.32 mm	0.25 µm	290‒320 °C
				0.45 mm	1.0 µm
DB-ALC1 and DB-ALC2	N/A	N/A	N/A	0.32 mm	1.8 µm (for ALC1); 1.2 µm (for ALC2)	260‒280 °C
				0.53 mm	3.0 µm (for ALC1); 2.0 µm (for ALC 2)
DB-5ms EVDX	N/A	N/A	N/A	0.20 mm	0.33 µm	325‒350 °C
DB-Select 624 UI for <467>	N/A	N/A	N/A	0.25 mm	1.4 µm	260 °C
				0.32 mm	1.8 µm
				0.53 mm	1.8 µm

[1] Abhängig von der Filmdicke und ob bei konstanter Temperatur oder mit einem Gradienten gearbeitet wird.

Contact Us

First Name*

Last Name*

Company*

Email*

Telephone

Message*

I have taken note of the Privacy Policy and agree that the data I have provided will be collected and stored electronically. My data will only be used strictly for the purpose of processing and responding to my request.

Fields marked with * must be filled in