Agilent Technologies / Agilent-CP

Agilent-CP

CP is a brand name for GC columns manufactured by Agilent Technologies™. The columns cover a very wide range of polarity and application. Most of the CP phases are bonded and cross-linked and solvent rinsable.

Product Line

Products

Page
Page 38
Page 39
You're currently reading page 40
Page 41
Page 42
Page

Show

CP-Al2O3/KCl 50m x 0,32mm x 4µm auf 5 in

AG-CP7515I5

€1,611.00

Product Type: GC Column Base Material: Aluminium oxide KCl dectivated Delivery Time: approx. 5-6 days Chemistry: Al2O3 (Alumina, PLOT Al2O3, KCl, Na2SO4) Manufacturer: Agilent Technologies Film Thickness [µm]: 4 µm Internal Diameter: 0.32 mm Length: 50 m

CP-Al2O3/KCl 50m x 0,32mm x 4µm

AG-CP7515

€1,436.00

CP-SimDist UM 10m x 0,53mm x 0,88µm, 5i

AG-CP7512I5

€1,123.00

Product Type: GC Column Delivery Time: approx. 5-6 days Chemistry: Petrochemical, SimDist (HT SimDist) Manufacturer: Agilent Technologies Film Thickness [µm]: 0.88 µm Internal Diameter: 0.53 mm Length: 10 m

CP-SimDist UM 10m x 0,53mm x 0,88µm

AG-CP7512

€1,001.00

CP-Al2O3/KCl 10m x 0,32mm x 5µm

AG-CP7511

€467.00

CP-ChiraSil-DEX CB 50m x 0,25mm x 0,25µm

AG-CP7510

€1,539.00

Product Type: GC Column Base Material: β-cyclodextrin Delivery Time: approx. 5-6 days Chemistry: Chiral GC Manufacturer: Agilent Technologies Film Thickness [µm]: 0.25 µm Internal Diameter: 0.25 mm Length: 50 m

CP-Sil 8 CB Pest 50m x 0,53mm x 0,24µm

AG-CP7504

€1,405.00

Product Type: GC Column Delivery Time: approx. 5-6 days Chemistry: Sil 8 CB (Sil 8 CB MS), Pesticides Manufacturer: Agilent Technologies Film Thickness [µm]: 0.24 µm Internal Diameter: 0.53 mm Length: 50 m

CP-ChiraSil-DEX CB 25m x 0,32mm x 0,24µm

AG-CP7503

€1,176.00

Product Type: GC Column Base Material: β-cyclodextrin Delivery Time: approx. 5-6 days Chemistry: Chiral GC Manufacturer: Agilent Technologies Film Thickness [µm]: 0.24 µm Internal Diameter: 0.32 mm Length: 25 m

CP-ChiraSilDEX CB 25m x0,25mmx0,24µm 5in

AG-CP7502I5

€1,273.00

CP-ChiraSil-DEX CB 25m x 0,25mm x 0,24µm

AG-CP7502

€1,136.00

Page
Page 38
Page 39
You're currently reading page 40
Page 41
Page 42
Page

Show

Technical Data

CP-Sil 5 CB:

General purpose phase
Available in fused silica or UltiMetal

CP-Sil 5 CB for Formaldehyde:

Optimized for analysis of formaldehyde, water and methanol
Trace analysis of sulfur compounds and partial permanent gas analysis possible

CP-Sil 8 CB:

General purpose phase
Available in fused silica and UltiMetal
Low bleed and high column-to-column reproducibility

CP-Sil 13 CB:

Specially developed for the analysis of medium polarity compounds
Ideal for confirmational analyses using ECD (Electron Capture Detector)

CP-Sil 24 CB:

Specially suitable for analysis of amines, drugs and pesticides
Ideal for analysis using ECD
Excellent confirmation column in combination with CP-Sil 5 CB or CP-Sil 8 CB

CP-Sil 43 CB:

Separates aromatic from aliphatic hydrocarbons with selectivity equivalent to OV-255

CP-1301:

Ideal for analysis of herbicides, pesticides and many pharmaceutical products
High reproducibility and good inertness

CP-Sil 19 CB:

Ideal for many environmental, food and beverage, and pharmaceutical applications
Useful as confirmation column

CP-Wax 52 CB:

High resolution of low boiling point analytes
High polarity provides separations for a broad range of applications
Excellent reproducibility and temperature stability for a variety of EPA and ASTM methods

CP-Wax 58 FFAP CB:

Ideal for analysis of acidic compounds, such as phenols, underivatized and derivatized free fatty acids
Highest polarity bonded wax column for analyzing polar compounds
High inertness provides excellent peak shape

Petroleum columns:

CP-Sil PONA CB:

High resolution analysis of paraffins, olefins, naphthalenes and aromatics in complex hydrocarbon mixtures
Engineered for hydrocarbon analysis according to ASTM (DHA method)
Inert to polar compounds for highly accurate data

CP-Sil PONA für ASTM D 5134:

Optimized PONA analysis for ASTM D5134
Exact dimensions as specified in the ASTM method for full compliance
Inert to polar additives

CP-SimDist:

For simulated distillation analysis up to C₁₀₀
Low bleed improves quantitation
High temperature polyimide coating extends lifetime

CP-SimDist UltiMetal:

Designed for ASTM D2887 and the extended D2887 method compliance
Low bleed
Extended analysis to C₁₂₀ with maximum temperature of 450 °C
UltiMetal tubing for excellent durability
Excellent retention time repeatability and column lifetime due to special deactivation of UltiMetal surface

CP-Sil 2 CB:

Extremely low polarity bonded stationary phase
Superior replacement to squalane
Unique selectivity toward cyclic hydrocarbons

CP-TCEP for alcohols in gasoline:

Engineered for analysis of alcohols in gasoline
Excellent peak shape for accurate separations of alcohols
Unique selectivity separates benzene after n-dodecane

CP-Sil 5 CB for Sulfur:

Optimized for analysis of volatile sulfur compounds
Trace analysis of sulfur compounds to C₇ mercaptan for high productivity
High inertness, elutes SO2 for high quality data and low detection limits

CP-Volamine:

Non-polar stationary phase with excellent stability and performance for samples containing water
Ideal for analyzing volatile amines like MMA, DMA and TMA (monomethyl, dimethyl and trimethyl amine)

CP-Sil 8 CB for Amines:

Optimized inertness performance for a broad range of amine compounds
Thermal stability up to 350 °C enables separations of amines up to C₂₀ as well as alkanolamines

Pestizide- and PAK Columns

CP-Sil 8 CB for Pestizides:

Linear column response down to femtogram level for improved productivity
Can be used with on-column injection techniques
Excellent inertness

CP-Sil 19 CB for Pestizides:

Ideal as a confirmation column for reliable results
Specified for EPA and CLP analytes for ultimate compliance
Supplied with a coupled retention gap for on-column injection for best detection limits

CP-Sil PAH CB UltiMetal:

Separates all 16 PAHs according to EPA Method 610
High temperature, low bleed phase

Semivolatiles Columns:

CP-Sil 8 CB for PCB:

Engineered for the analysis of PCBs according to DIN method 51527
Ideal for trace level ECD detection of PCBs
High temperature stability provides low bleed and extended lifetime

CP-Sil 5/C18 CB for PCB:

Engineered for high resolution PCB analysis
Lower polarity than 100% polydimethylpolysiloxane due to its C18 substitution
Optimized column length for separation of critical isomer pairs: 28/31, 56/60, 149/118, 105/153/132 and 170/190
Provides high signal-to-noise ratios for ECD detectors

CP-Sil 88 for Dioxins:

High polarity stationary phase with specific selectivity for dioxins and dibenzofuran separations
Integrated retention gap eliminates leaks and extends column lifetime with splitless injections
2,3,7,8-TCDD can be determined at low concentrations

Volatiles Columns:

CP-Select 624 CB:

EPA volatiles methods 524.2, 624 and 8015
Specified by Pharmacopoeia V.3.3.9 for residual solvents
Excellent column-to-column reproducibility and low bleed

CP-Select CB for MTBE:

Engineered for analysis of MTBE in reformulated gasoline
Unique selectivity for MTBE
Broad dynamic range for quantification of MTBE
Ideal as primary or confirmation column

Food, Flavors and Fragrances Columns:

CP-Sil 88:

High selectivity towards positional and geometric isomers for ease-of-use
Highly substituted cyanopropyl phase
Highest polarity, non-chemically bonded and stabilized

CP-Sil 88 for FAME:

Optimized for analysis of FAME (Fatty Acid Methyl Ester) cis/trans isomers
Use for FAME separations in the C₆ to C₂₆ range

CP-Wax 57 CB:

Unique high polarity bonded wax column
Industry proven for the analysis of alcohols in the brewing and wine/spirits industry
Excellent inertness for optimum peak shape of alcohols and glycols

CP-Carbowax 400 for volatiles in alcohol:

Designed for the analysis of volatiles in alcoholic beverages
High resolution for amyl alcohols for accurate quality control

CP-Wax 57 CB for Glycols and Alcohols:

Optimized for the analysis of glycols, diols and alcohols
Unique, high polarity wax phase

CP-TAP CB for Triglycerides:

Engineered phase for detailed analysis of triglycerides
Separates complete triglyceride pattern in less than 16 minutes
Separation based on carbon number and degree of unsaturation
Stabilized phase for low bleed and enhanced column lifetime
Available in fused silica and UltiMetal

CP-FFAP CB for Free Fatty Acids in Dairy Products:

Ideal for flavors, aromas and free fatty acids C₁‒C₂₆
Separates C₂‒C₂₄ acids in one run without derivatization
Water and solvent resistant

CP-Chiralsil Val:

Designed for separations of optically active compounds including amino acids
Both antipode phases are available (D and L) for maximum versatility
Tested for separation of amino acid enantiomers

CP-Chirasil-Dex CB:

Homogeneous enantioselectivity throughout the column
High resolution factor between isomers across a broad application range
Chemically bonded phase for excellent longevity
Low elution temperature of polar compounds
Suitable for all injection techniques

CP-Cyclodextrin-β-2,3,6-M-19:

Unique selectivity for optical and positional isomer separations
High efficiency enables wide range of applications
Separates o-, m-, and p-xylenes
Excellent peak shape for underivatized polar compounds

PLOT-Columns:

CP-Al₂O₃/KCl und CP-Al₂O₃/Na₂SO₄:

Aluminum oxide PLOT columns offer high selectivity for separating ppm levels of C₁‒C₅ hydrocarbons in process streams
High capacity thick films
No need for sub-ambient cooling
Available in fused silica and UltiMetal

CP-SilicaPLOT:

No influence of water on retention times
Elution of CO₂ and sulfur gases at ppm levels
Separates cyclopropane from propylene
Ideal for a wide range of applications such as COS in ethylene, freons, hydrocarbons, propylene and sulfur compounds
High selectivity for C₁‒C₄ isomers in the presence of water
No negative influence on retention or peak shape when water is present in the sample
Inert surface preparation results in no decomposition pentadienes or freons

CP-Molsieve 5Å:

Separate argon and oxygen at ambient temperature to reduce costs
High efficiency and symmetrical peaks

Column-Name	Phase	Polarity	USP	ID	Film thickness	T_max^[1]
CP-Sil 5 CB	Dimethyl polysiloxane (100%)	Non-Polar	G1, G2, G9	0.10 mm	0.10, 0.12, 0.40 µm	290‒350 °C
				0.15 mm	0.12, 1.20, 2.0 µm
				0.20 mm	0.11, 0.20, 0.33, 0.50, 0.80 µm
				0.25 mm	0.10, 0.12, 0.25, 0.40, 1.0, 1.2 µm
				0.32 mm	0.10, 0.12, 0.25, 0.40, 0.52, 1.0, 1.2, 3, 5 µm
				0.53 mm	0.15, 0.50, 1.0, 1.5, 2, 3, 5 µm
CP-Sil 8 CB	Diphenyl- /dimethylpolysiloxane (5%/95%)	Non-Polar	G27, G36	0.10 mm	0.10 µm	290‒350 °C
				0.15 mm	0.12, 1.20 µm
				0.20 mm	0.20, 0.33 µm
				0.25 mm	0.10, 0.12, 0.25, 0.40, 1.0, 1,2 µm
				0.32 mm	0.10, 0.12, 0.25, 0.40, 0.52, 1.0, 1.2, 5 µm
				0.53 mm	0.15, 0.50, 1.0, 1.5, 2, 5 µm
CP-Sil 13 CB	Diphenyl- /dimethylpolysiloxane (14%/86%)	Mid-Polar	N/A	0.15 mm	0.40 µm	290‒330 °C
				0.25 mm	0.20, 0.40, 1.2 µm
				0.32 mm	0.20, 0.40, 1.2 µm
				0.53 mm	1.0, 2.0 µm
CP-Sil 24 CB	Diphenyl- /dimethylpolysiloxane (50%/50%)	Mid-Polar	G3	0.25 mm	0.25, 0.50 µm	265‒300 °C
				0.32 mm	0.25 µm
				0.53 mm	0.50, 1.0 µm
CP-Sil 43 CB	Cyanopropyl-/phenyl- /dimethylpolysiloxane (25%/25%/50%)	Mid-Polar	G19	0.25 mm	0.20 µm	200‒225 °C
				0.32 mm	0.20 µm
CP-1301	Cyanopropylphenyl- /dimethylpolysiloxane (6%/94%)	Mid-Polar	G43	0.25 mm	0.25, 1.0 µm	265‒280 °C
				0.32 mm	0.25, 1.0 µm
				0.53 mm	1.0 µm
CP-Sil 19 CB	Cyanopropylphenyl- /dimethylpolysiloxane (14%/86%)	Mid-Polar	G46	0.10 mm	0.20 µm	275‒300 °C
				0.15 mm	0.50 µm
				0.20 mm	0.20 µm
				0.25 mm	0.15, 0.20, 0.25, 0.40, 1.0, 1.2 µm
				0.32 mm	0.15, 0.20, 0.25, 0.40, 1.0, 1.2 µm
				0.53 mm	0.50, 1.0, 2.0 µm
CP-Wax 52 CB	Polyethylenglykol (PEG)	Polar	G16, G39, G47	0.10 mm	0.10, 0.20 µm	250‒275 °C
				0.15 mm	0.15, 0.25 µm
				0.20 mm	0.20 µm
				0.25 mm	0.15, 0.20, 0.25, 0.50, 1.2 µm
				0.32 mm	0.15, 0.20, 0.25, 0.40, 0.50, 1.0, 1.2 µm
				0.53 mm	1.0, 2.0 µm
CP-Wax 58 FFAP CB	Nitroterephthalic acid modified Polyethylene Glycol	Polar	G25, G35	0.20 mm	0.30 µm	250‒275 °C
				0.25 mm	0.20 µm
				0.32 mm	0.2, 0.5, 1.2 µm
				0.53 mm	0.5, 1.0, 2.0 µm
CP-Sil 5 CB for Formaldehyde	Dimethyl polysiloxane (100%)	Non-Polar	N/A	0.32 mm	8.0 µm	300‒325 °C
CP-Sil PONA CB	Dimethyl polysiloxane (100%)	Non-Polar	N/A	0.21 mm	0.5 µm	250‒275 °C
				0.25 mm	0.5, 1.0 µm
CP-Sil PONA for ASTM D 5134	Dimethyl polysiloxane (100%)	Non-Polar	N/A	0.21 mm	0.5 µm	250‒275 °C
CP-SimDist	Dimethyl polysiloxane (100%)	Non-Polar	G2	0.32 mm	0.10 µm	375‒400 °C
				0.53 mm	0.10, 0.17 µm
CP-SimDist UltiMetal	Dimethyl polysiloxane (100%)	Non-Polar	G2	0.53 mm	0.06, 0.09, 0.11, 0.17, 0.53, 0.88, 1.2, 2.65, 5.0 µm	400‒450 °C
CP-Sil 2 CB	N/A	Non-Polar	N/A	0.25 mm	0.25 µm	200 °C
				0.32 mm	0.25, 1.2 µm
				0.53 mm	2.0 µm
CP-TCEP for alcohols in gasoline	N/A	Non-Polar	N/A	0.25 mm	0.40 µm	135‒140 °C
CP-Sil 5 CB for sulfur	Dimethyl polysiloxane (100%)	Non-Polar	N/A	0.32 mm	4.0 µm	300‒325 °C
CP-Volamine	N/A	Non-Polar	N/A	0.32 mm	N/A	265‒300 °C
CP-Sil 8 CB for Amines	Diphenyl- /dimethylpolysiloxane (5%/95%)	Non-Polar	N/A	0.15 mm	2.0 µm	325‒350 °C
				0.25 mm	0.25, 0.50 µm
				0.32 mm	1.0 µm
				0.53 mm	1.0 µm
CP-Wax for volatile Amines and Diamines	N/A	N/A	N/A	0.32 mm	1.2 µm	220 °C
				0.53 mm	2.0 µm
CP-Sil 8 CB for pestizides	Diphenyl- /dimethylpolysiloxane (5%/95%)	Non-Polar	N/A	0.25 mm	0.12 µm	300‒325 °C
				0.53 mm	0.25 µm
CP-Sil 19 CB for pestizides	Cyanopropylphenyl- /dimethylpolysiloxane (14%/86%)	Mid-Polar	N/A	0.25 mm	0.20, 0.25 µm	260‒300 °C
				0.32 mm	0.25 µm
				0.53 mm	1.0 µm
CP-Sil PAH CB UltiMetal	N/A	N/A	N/A	0.25 mm	0.12 µm	400‒425 °C
CP-Sil 8 for PCB	Diphenyl- /dimethylpolysiloxane (5%/95%)	Non-Polar	N/A	0.25 mm	0.25 µm	300‒325 °C
CP-Sil 5/C18 CB for PCB	N/A	Non-Polar	N/A	0.25 mm	0.10 µm	275‒300 °C
				0.32 mm	0.10 µm
CP-Sil 88 for dioxins	N/A	Polar	N/A	0.25 mm	0.10, 0.20 µm	225‒270 °C
				0.32 mm	0.13 µm
CP-Select 624 CB	Cyanopropylphenyl- /dimethylpolysiloxane (6%/94%)	Non-Polar	G43	0.15 mm	0.84 µm	265‒280 °C
				0.25 mm	1.4 µm
				0.32 mm	1.8 µm
				0.53 mm	3.0 µm
CP-Select CB for MTBE	N/A	N/A	N/A	0.25 mm	0.25 µm	200 °C
CP-Sil 88	Cyanopropyl- /phenylmethylpolysiloxane (90%/10%)	Polar	G5, G8	0.25 mm	0.20 µm	225‒240 °C
				0.32 mm	0.20 µm
CP-Sil 88 for Fatty acid methylester (FAME)	Cyanopropyl-/phenylmethylpolysiloxane (90%/10%)	Polar	G8	0.25 mm	0.20 µm	225‒240 °C
CP-Wax 57 CB	Polyethylenglykol (PEG)	Polar	N/A	0.15 mm	0.12 µm	200‒225 °C
				0.25 mm	0.20 µm
				0.32 mm	0.20, 1.2 µm
				0.53 mm	1.0, 2.0 µm
CP-Carbowax 400 for volatile compoands in alcohol	Polyethylenglykol (PEG)	Polar	G20	0.32 mm	0.20 µm	60‒80 °C
CP-Wax 57 CB for glycols and alcohols	Polyethylenglykol (PEG)	Polar	N/A	0.25 mm	0.20 µm	200‒250 °C
				0.53 mm	0.50 µm
CP-TAP CB for Triglycerides	N/A	N/A	N/A	0.25 mm	0.10 µm	350‒370 °C
CP-FFAP CB for free fatty acids in milk products	N/A	N/A	G35	0.15 mm	0.25 µm	250‒275 °C
				0.32 mm	0.30 µm
				0.53 mm	1.0 µm
CP-Chiralsil Val	Optical Antipode D Optical Antipode L	N/A	N/A	0.25 mm	0.08 µm	200 °C
				0.25 mm	0.12 µm
CP-Chiralsil-Dex CB	Cyclodextrin modified Dimethyl polysiloxane (100%)	N/A	N/A	0.25 mm	0.25 µm	200 °C
				0.32 mm	0.25 µm
CP-Cyclodextrin-β-2,3,6-M-19	N/A	N/A	N/A	0.25 mm	0.25 µm	225‒250 °C
				0.32 mm	0.25 µm
CP-Al₂O₃/KCl and CP-Al₂O₃/Na₂SO₄	N/A	N/A	N/A	0.25 mm	4.0 µm	200 °C
				0.32 mm	5.0 µm
				0.53 mm	10.0 µm
CP-SilicaPLOT	N/A	N/A	N/A	0.25 mm	3.0 µm	225 °C
				0.32 mm	4.0 µm
				0.53 mm	6.0 µm
CP-Molsieve 5Å	N/A	N/A	N/A	0.25 mm	30.0 µm	350 °C
				0.32 mm	10.0, 30.0 µm
				0.53 mm	15.0, 50.0 µm

[1] Abhängig von der Filmdicke und ob bei konstanter Temperatur oder mit einem Gradienten gearbeitet wird.

Contact Us

First Name*

Last Name*

Company*

Email*

Telephone

Message*

I have taken note of the Privacy Policy and agree that the data I have provided will be collected and stored electronically. My data will only be used strictly for the purpose of processing and responding to my request.

Fields marked with * must be filled in

The right column for you - we will be happy to support you individually

Competent consultants are always at your side. Write a message to our consultants, we will get back to you and give you individual support.

You will find:

Application support

Availability and delivery times

Price information with individual conditions

Certificates of analysis, MSDS, data sheets

My Cart